Search Results - technology+classifications+%3e+engineering

9 Results

Sort By:

Electrospray Deposition of PTFE Coatings

Electrospray atomization to create thin, conformal coatings of polytetrafluoroethylene Technology Overview: The method uses electrospray atomization to create thin, conformal coatings of polytetrafluoroethylene (PTFE)and to determine the optimal processing conditions for creating a thin, conformal film of PTFE on razor blades to alleviate the...

Published: 12/28/2023 | Inventor(s): Bryce Kingsley, Paul Chiarot

Keywords(s):

Category(s): Technology Classifications > Engineering, Campus > Binghamton University

Brewster Angle Excitation Dichroic for Transmissive Laser Activated Remote Phosphor Applications

New approach to improve the efficiency of photon emissions using the Brewster angle. Technology Overview: Many solid-state lighting (SSL) applications require high luminance and high luminous flux. Applications include projection, automotive lighting, stage lighting, medical, and other areas. Typical systems use light emitting diodes to excite phosphors...

Published: 12/28/2023 | Inventor(s): David Klotzkin, Xin Wen

Keywords(s):

Category(s): Campus > Binghamton University, Technology Classifications > Engineering, Technology Classifications > Optics and Photonics

Manufacturing Method for Ultra-high Solid State Capacitance Capacitors

Fabricating the dielectric of capacitors with a thin and continuous coating, providing the best trade-off of capacitance and breakdown voltage Background: Supercapacitors are devices with high power density, moderate energy density, and long, stable life. These properties position these devices to replace or complement batteries to store and deliver...

Published: 12/28/2023 | Inventor(s): Tara Dhakal, James Turner, Ganesh Gudavalli, Pravakar Rajbhandari

Keywords(s): CleanTech, XCEED

Category(s): Campus > Binghamton University, Technology Classifications > Engineering

Levitating MEMS Switch

Microelectromechanical system (MEMS) switch that can recover from pull-in collapse using electrostatic levitation Technology Overview: A microelectromechanical system (MEMS) switch that can recover from pull-in collapse using electrostatic levitation. The approach is of great utility for any MEMS component that has to recover easily from pull-in,...

Published: 4/26/2024 | Inventor(s): Shahrzad Towfighian, Mark Pallay

Keywords(s):

Category(s): Campus > Binghamton University, Technology Classifications > Electronics, Technology Classifications > Engineering

Additive Laser or Electron Beam Metal Deposition onto Glasses and Ceramics

Novel additive manufacturing method to bond metals onto glass and ceramic surfaces Technology Overview: The technology provides methods and apparatus for bonding metals onto glass and ceramic substrates, including those composed of oxides, silicides, nitrides, and carbides, carbon materials, borides, arsenides, sulfides. This method enables...

Published: 12/28/2023 | Inventor(s): Scott Schiffres, Arad Azizi

Keywords(s): CleanTech, XCEED

Category(s): Campus > Binghamton University, Technology Classifications > Engineering

A Starting Point Selection Approach to Event Playback for Model Validation

A starting point selection approach to overcome the difficulty of phasor measurement units based model validation Background: Model validation is an essential task to ensure the accuracy of a dynamical model in a power system. Currently, major vendors’ software tools are equipped with an “event playback” function to validate...

Published: 12/28/2023 | Inventor(s): Ning Zhou, Shahrokh Akhlaghi

Keywords(s):

Category(s): Technology Classifications > Engineering, Campus > Binghamton University

Positive Ceramic/SAM (Self-Assembled Monolayer) Bilayer Coatings

A dipping process that deposits a bi-layer coating consisting of a ceramic film with a compliant self-assembled monolayer binding layer grow ceramic thin films onto silicon substrates Background: A dipping process that deposits a bi-layer coating consisting of a ceramic film with a compliant self-assembled monolayer (SAM) binding layer grow ceramic...

Published: 9/30/2021 | Inventor(s): Junghyun Cho, Wayne Jones, Scott Oliver, Bahgat Sammakia

Keywords(s): #SUNYresearch, Technologies

Category(s): Technology Classifications > Engineering, Technology Classifications > Electronics, Campus > Binghamton University

Periodic Thermoreflectance Layer-by-Layer Non-Destructive Testing

Non-invasive monitoring of in-situ printing uses thermal waves to detect defects that can be easily reworked during production Technology Overview: Herein, this invention disclosure relates to a method to non-invasively monitor printing in-situ. This technique has the ability to monitor a few layers into the material, in a manner that can differentiate...

Published: 10/13/2021 | Inventor(s): Scott Schiffres

Keywords(s): #SUNYresearch, CleanTech, Technologies

Category(s): Technology Classifications > Engineering, Campus > Binghamton University

Layer-by-Layer Non-Destructive Testing of Metal 3D Printed Objects

Non-destructive testing of metal printed parts layer-by-layer during the build process, allowing for correction of voids while it is being printed Background: Selective laser melting has grown in popularity due to the advances in 3D printing of metal objects. It allows for layer-by-layer construction of parts that would previously have been either...

Published: 12/28/2023 | Inventor(s): Scott Schiffres, Matthias Daeumer, Jacob Simmons, Arad Azizi

Keywords(s): #SUNYresearch, CleanTech, Technologies, XCEED

Category(s): Technology Classifications > Engineering, Campus > Binghamton University